Detail INCUBATOR
CO2- Incubators ( Model INCO2)
The rapid development in „ biotechnology“ requires appliances which can keep pace with it.
MEMMERT CO2 incubators had been developed for this purpose and will also meet these standards in future due to a close cooperation with those people working directly in this field.
What are the most important advantages of the MEMMERT-CO2-incubators?
* Electropolished stainless steel interior
* Integrated sterilization cycle at + 160° C for two hours ( sterilization - not desinfection or decontamination – means that all microorganisms including spores are killed
* No sensors, shelves, mountings, etc. have to be removed during the sterilization cycle
* LED-humidity display exactly shows the set and actual humidity inside the chamber
* Time is money: integrated fault diagnostics for temperature, CO2, humidity limit control or resp. humidity control for fast repair
* NDIR-CO2 sensor with auto-zeroing which compared to the thermal conductivity sensor has the advantage that immediately after switching on the CO2-incubator the CO2 is reliably measured and indicated on the display. TC-sensors require the stabilising of the temperature inside the working chamber.
* Continuous gas supply by integrated automatic gas cylinder change-over ( standard)
* Double overheat safety device according to safety standards DIN 12880 – adjustable electronic overtemperature controller safety class 3.1 and temperature limiter class 1
* GLP-conforming documentation can either be done through printer – parallel printer interface– or via PC – RS 232 alternatively RS 485 including software Celsius 2000 without extra charge both being part of the standard delivery scope
* Last but not least works calibration certificate at 37° C also included in standard
Standard features:
* 3 models sizes 108, 153 and 246 litres
* Temperature range + 20° C up to + 45° C
* CO2 adjustable from 0% up to 20% with a setting accuracy of 0, 1%
* 2 connections with automatic change-over device for gas bottles
* CO2 infra-red absorption system with automatic zeroing
* Large-area heating on all sides
* Integrated sterilisation stage at + 160° C ( set point wait dependent) for 2 hours -sterilisation ( NOT DISINFECTION) without removal of sensors
* Doubled overheat safety by microprocessor overheat controller, adjustable ( TWW) and temperature limiter TB safety device class 3.1 and class 1 according to DIN 12 880
* Stainless steel 1.4301, interior electropolished
* Serial interface RS232 incl. MEMMERT-software „ Celsius 2000“ or optional RS485 ( no extra charge)
* Parallel printer interface for connection of an EPSON -compatible printer for documentation in accordance with GLP ( Good Laboratory Practice)
* Works calibration certificate for one temperature: + 37° C
To avoid condensation the MEMMERT-CO2 incubators are additionally provided with :
* Integrated humidity limit control with digital display of relative humidity adjustable from 88-97% rh
* Option against extra charge: active humidity control adjustable from 40 to 97% rh via LED display – water shelves are omitted
* Additonal door heating
Overheat Safety Device
* Microprocessor overheat controller, adjustable ( TWW) and temperature limiter ( TB) protection class 3.1 and 1, according to DIN 12 880
* Audible and visual alarm system
Textured Stainless Steel Casing
* Fully insulated stainless steel door with double locking and 4-point adjustment
* Inner glass door with opening ( 8mm dia.) to take gas samples
* Rear zinc plated steel
Interior – Heating Concept
* Easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, electropolished and hermetically welded
Temperature Range
* From + 20° C up to + 45° C, however at least 7° C above ambient temperature
Technical Data
Model Weight ( kg) Casing Size
w x h x d ( mm) Interior Heating Size
w x h x d ( mm) Vol ( l) Support Shelves / Supplied Available Stainless Steel Water Dish Available Voltage
INC108 70 710 x 778 x 550 560 x 480 x 400 108 3 1 115 V, 60Hz
230 V, 60Hz
INC153 90 630 x 938 x 650 480 x 640 x 500 153 3 1 115 V, 60Hz
230 V, 60Hz
INC246 110 790 x 938 x 750 640 x 640 x 600 246 6, half-width 2, half-width 115 V, 60Hz
230 V, 60Hz
Tampilkan Lebih Banyak