AUTOCLAVE STERILISATION

Negara Asal: Jepang Cara Pembayaran: Transfer Bank ( T/ T) Keterangan: Features : Easy operation using the " Top-open lid" A top-open lid, which can be operated easily with a single hand or foot, is provided with the SX autoclaves. To open the lid, the lid lock is released by stepping on the foot pedal locates at the bottom while pressing the lid down. The lid can be opened with minimal effort owing to mechanical assistance. In addition, the lid can be closed easily just by pressing it down. Saving the installation space The main body is very compact owing to the design which provides thorough installation space saving. In addition, installation space at the side of the main body which is required for models employing a slide-open lid, which is not necessary at SX autoclaves top-open lid. Even when several SX autoclaves are installed side-by-side, the necessary installation space is minimized. Cooling fan provided as a standard feature A rapid air-cooling function ( vessel-cooling fan) permitting reduction of chamber cool down time is provided as a standard feature. This is most appropriate for lowering the temperature rapidly on completion of the cycle. The time required for lower the temperature is much reduced by employment of the cooling fan in comparison with natural cooling Specifications : Model SX-300E / SX-500E / SX-700E Operating temperature range Sterilizing 105 to 135 degree celsius ( 0.019 to 0.212MPa) Heating 45 to 104 degree celsius ( 0 to 0.015MPa) Warming 45 to 95 degree celsius Maximum operating pressure 0.263MPa / 0.25MPa Temperature Display style Digital Pressure gauge Display Analog Display 0 to 0.4MPa Heat source 1.5 kW electric / heater 2.0 kW electric / heater 3.0 kW electric heater Safety device Water level sensor, Current leakage breaker, Lid interlock, Over-heat prevention, Over-pressure prevention, Open temperature sensor detection, Safety valve Protection type against electrical shock Class I equipment Time Display Digital Display range Sterilizing 1 to 99 hours, 1 to 999 minutes ( variable: 0: 01 to 9: 59/ 10 to 99) Heating Warming 1 to 99 hours, 4 hours ( changeable) Pressure chamber type PED Category II Chamber dimensions Diameter325 x553 mm / Diameter325 x733 mm / Diameter370 x774 mm Chamber capacity Effective internal volume: 36 L Internal volume: 44 L Effective internal volume: 50 L Internal volume: 58 L Effective internal volume: 69 L Internal volume: 79 L Chamber material SUS304 Dimensions ( mm) 410W, 477D, 790Hmm ( With projection: 574 D) 410W, 477D, 970Hmm ( With projection: 574 D) 470W, 528D, 1003Hmm ( With projection: 625 D) Weight 50kg 60kg 72kg Rated voltage 230V AC Rated voltage 7A 9A 13A Power input Single-phase 230 V AC ( 50/ 60 Hz) 10 A or more Single-phase 230 V AC ( 50/ 60 Hz) 15 A or more Single-phase 230 V AC ( 50/ 60 Hz) 15 A or more Power consumption 1.5kW 2.0kW 3.0kW Accessories Stainless basket ( Diameter300 x182 mm) * 1 Stainless basket ( Diameter300 x 182 mm) * 2 Stainless basket ( Diameter345 x 181 mm) * 2 Caster stoppers 4, Slatted Bottom Plate 1, Operator' s Manual 1, Clear Plastic Accessory Case 1, Attachment Screw Plastic Accessory Case 1, Warranty card 1, Customer card 1, Inspection sheet 1
autoclave